Wavlink Extender Not Connecting to Internet? Let’s Fix This!
Getting the Wavlink extender installed in the home to extend the existing network is becoming common these days. No more WiFi dead spots in the home with the right Wavlink setup. But if you are experiencing Wavlink extender not connecting to internet issue despite all the hard work, then the situation becomes pretty frustrating. We get you! But do not worry; we are here with the best possible solutions for this problem. Just walk through the troubleshooting hacks provided in this guide and get rid of the issue forever.
Wavlink Extender Not Connecting to Internet [Fixed]
1. Reboot Extender
Technical glitches with networking devices can lead to internet-related troubles. So you need to reboot your Wavlink extender to get these eliminated. Wondering what a reboot process is? Follow the instructions provided ahead:
- Get closer to your Wavlink extender and turn its power button off.
- Disconnect it from the power socket.
- Let the device rest for a while. Meanwhile, disconnect any other cable that is connected to it.
- After a while, connect all the cables back to it.
- Plug the power cable back into the power socket.
- Turn the power button on.
This reboots your Wavlink WiFi range extender. Try connecting it to the internet now. Has the Wavlink extender not connecting to internet issue been fixed now? If the answer is yes, then congratulations! You can stop your troubleshooting process here. Otherwise, continue with the next step.
2. Bring the Devices Closer
The Wavlink extender takes in the signal from the host gateway and then extends it further. For this, it is essential that the extender is placed within the range of the host gateway or the router. Are you fulfilling this condition? Maybe not, which is why you are experiencing the issue at hand. Without wasting any further minutes, bring the extender closer to the router. But do not place them right next to each other.
3. Verify Connection Source
For the Wavlink extender to connect to the internet, you need to connect it to the host router. What medium are you using for this? Is it a wired or a wireless one? In case of a wireless connection, try reconnecting them after the reboot process. A wired connection being more reliable, we recommend you go for it. Thus get your hands on an Ethernet cable and connect the extender to the router.
However, if you already had a wired connection in place, then have a good look at the cable. Perhaps it is damaged or worn out. Or maybe it is connected loosely in any of the devices. Why don’t you try replacing the cable? Make sure that you are inserting the cable into the respective Ethernet ports on both extender and router. Also, ensure making a solid connection.
4. Kick Out Interference
Is your Wavlink extender sharing its location with some devices or appliances that radiate EM waves? This may be so. The waves can interfere with the signal of the extender thereby reducing the network quality. Perhaps the Wavlink extender not connecting to internet is a consequence of the WiFi interference. Thus keep your extender away from any such device or appliance and then see if the issue resolves.
5. Reset Wavlink Extender
If none of the above hacks fixed the Wavlink extender not connecting to internet issue, then it is time to reset your extender. There is a possibility that the extender setup is not done correctly. To get this fixed, reset the extender first and then perform the setup process again using the http //wifi.wavlink.com setup wizard.
Need Further Assistance?
This is all about how you can get the Wavlink extender not connecting to internet issue fixed. Under any circumstances, if the issue is still bothering you, getting in touch with our technical team will be helpful.