Wavlink Extender No Internet Access Issue [Six Causes & Fixes]
For people who have large homes, Wavlink wireless range extenders have become a go-to choice when it comes down to enhancing the performance of the existing home network. Despite this advantage, more than 85% of the users are experiencing issues while trying to access the network of the extender. In case you are also experiencing the Wavlink extender no internet access issue, then it might be because of a few reasons. They are as follows:
- The distance between the networking devices is excessive.
- You have connected the extender to the router wirelessly.
- The location of the wireless range extender is incorrect.
- Technical glitches can also cause the issue in debate.
- The wrong network is being accessed by you.
- You have not set up the range extender properly.
Now that you have become aware of why you are experiencing the Wavlink extender no internet access issue, you can make your way to the troubleshooting hacks discussed in the following section in order to resolve it in a happy-go-lucky manner.
How to Fix Wavlink Extender No Internet Access Issue?
Fix 1: Reduce Unwanted Distance
Bringing your networking devices closer is the first hack that you should implement in order to fix the Wavlink extender no internet access issue. But at the same time, make sure that you are not keeping them too close. Or else, a collision of their signals will happen. And if that happens, then no matter what you do, you will not be able to fix the issue at hand.
Fix 2: Put Any Other Source to Use
Another hack that can help you to step out of the mess that you are in is to change the source of connection currently in use. A wireless network can sometimes cause signal interference, which weakens the signals and impacts the performance of your wireless range extender. Therefore, use a wire to connect the networking devices.
Fix 3: Relocate the Range Extender
In case your extender is placed near cordless phones, washing machines, baby monitors, treadmills, televisions, or microwave ovens, then you should not wait anymore to change its location. Apart from this, ensure that the extender is not being kept in corners or near thick concrete walls. Now, see if there is internet access. No? Do not stop reading.
Fix 4: Give the Extender a New Start
To eliminate the fourth reason behind the issue at hand, you need to restart or reboot your Wavlink wireless range extender. The same can be done if you locate and press the power button on the extender to turn it off, unplug it from its wall socket, wait for some time, plug it back into its outlet, and then, turn it on.
Fix 5: Install the WiFi Extender Again
As mentioned under the list of reasons earlier, you might also be stuck with the Wavlink extender no internet access issue because you did not configure your networking device via the http //wifi.wavlink.com setup web address well. To take care of the problem, you have got to set up your device again.
Fix 6: Access Right WiFi Network
Have you considered the possibility that the issue that you “think” you are facing is all an assumption? What if there is Wavlink extender internet access, but all this while you were trying to access the network of some other extender and not yours? Could be a possibility right? Taking this into account, you should only access the right WiFi network.
Wrapping Up
And it is a wrap. In this manner, you will definitely be able to resolve the Wavlink extender no internet access issue with ease. In case, you are afraid that you might experience the same issue in 2023 or the upcoming years, then it is recommended that you bookmark this post. Rather than doing this, if you would prefer to contact our team in the future for the same, then it is totally your choice.