Wavlink AC750 Firmware Not Getting Updated? Let’s Fix It!
To improve the performance of the Wavlink wireless range extender, you need to keep its firmware updated to the most recent version all the time. Wavlink releases firmware updates for its devices from time to time. Always keep an eye on these releases and update your device whenever a new update is ready. But what if you can not get your Wavlink extender updated? This post highlights some best solutions for fixing Wavlink AC750 firmware update failure issues. So if you can get through the firmware update process on any of the Wavlink extender models, then use the hacks given in this blog to get rid of the hindrance and then update your device via wifi.wavlink.com setup page. FYI, the same hacks stay valid for most Wavlink extender models.
Getting Fixed Wavlink AC750 Firmware Update Failure
Consider This First
Before trying anything else,
Check Power Supply
Check that the power supply to the Wavlink WiFi range extender is optimum. The faulty and fluctuating power supply is the major reason why you are not able to complete the Wavlink AC750 firmware update process. To confirm about the power supply, you need to check the power socket and the power cable. None of them should be damaged. Use a UPS if required.
Verify Internet Connection
The next thing that you need to check is the internet connection. An unstable internet connection is another possible reason for the obstruction in the firmware update process. Check the Ethernet connection to the Wavlink extender. Also, check the Ethernet ports on both extender and router. You can also contact your ISP to confirm about the internet connection.
After fixing the power supply and internet connection, try to perform the Wavlink AC750 firmware update. If you still fail in achieving success, then try the hacks given in the next section of the blog.
Hack 1: Reboot the Wavlink Extender
Try to reboot your Wavlink WiFi extender once. This can help in fixing firmware update failure issues. Perhaps some minor technical glitches are responsible for the issue at hand. You can fix them by giving your extender a quick reboot. To reboot the Wavlink extender, use the below-given steps:
- Disconnect the Wavlink extender from the host router.
- Next, power it off and disconnect it from the wall socket.
- Let it be in this state for some time.
- Thereafter, plug the extender back into the wall outlet.
- Toggle the power button to the On position to turn the extender on.
After the Wavlink extender is rebooted, try to update its firmware and see if it is working now or not. If the Wavlink AC750 firmware update fails even now then use the next hack.
Hack 2: Examine the Downloaded Firmware
In case you are trying to update the firmware on your Wavlink extender manually, then check the firmware file that you have downloaded. The firmware releases are different for different Wavlink extender model numbers. In case you have downloaded the wrong firmware file, then this is why you can’t get through the Wavink AC750 firmware update process.
We now want you to download the correct firmware file on your PC again keeping into account that you have a Wavlink AC750 extender. After downloading it, install it on your extender. You should be able to get through the process.
Hack 3: Reset Your Extender
In case you still fail in performing the Wavlink AC750 firmware update on your extender, then reset your extender now. It might have happened then while you were trying to update the firmware on your extender earlier, the firmware got corrupted. This happens if the process gets interrupted in between or in case you tried to update an incorrect firmware file on your extender. In such a situation, the last resort that you are left with is the Reset process.
This will delete the current settings along with the corrupted firmware from your extender. So, press the Reset button on the AC750 extender and reset it to the default settings.
The Closing Note
Once your Wavlink extender is reset, you need to set it up again. After that, try to execute the Wavlink AC750 firmware update. We are sure you won’t get stuck this time.