Important Wavlink Extender Troubleshooting Tips

Wavlink extender is the top networking device throughout the globe. With the help of an extender, people get connected to stable and fast internet. Plus, also enjoy the advanced level features that make the device edge over the competition. But, being an amazing networking device, it also has some technical issues which make the user’s internet experience worst. If you are also one of them and are looking for effective Wavlink extender troubleshooting tips, then you have come to the right place. In this blog, we’ll guide you through some easy troubleshooting tips to get your Wavlink extender up and running smoothly again.

Solution 1: Place the Wavlink Extender

The location of the extender plays an important role. If you place your networking device in the wrong place, it causes a network problem. So to place the extender at the optimal place walks through the following points:

• Locate the Wavlink extender at the center of the house. If you place the device in any room of your house you won’t get the strong signals.
• Try to elevate your extender from the floor. You’ll get better reception if the device is on a desk, not on the floor.
• Position the extender antenna vertically, so that the antenna is standing straight up. Antennas can be adjusted and lie horizontally, but standing straight up is best position.

Solution 2: Disconnect Some Devices

The Wavlink device might be too busy to respond to new requests if several computers or devices are using it on the same time. So we suggest you trying to disconnect some devices so that your networking device work efficiently.

Solution 3: Change Wireless Channel

Changing the wireless channel can also help you to resolve the network problem. So, if you face any network problems on your extender, then you can use this Wavlink extender troubleshooting tip.

To change the wireless channel of the extender you need to access the wifi.wavlink.com default web address of the device. Once you access it, you will see the login page in which you need to fill in the username and password. After that click on the login page, look for the wireless settings, and change the network channel.

Solution 4: Update Firmware

Check if your Wavlink extender’s firmware is up to date. Manufacturers often release firmware updates to improve performance and fix bugs. Visit the wifi.wavlink.com Wavlink web address and log into the dashboard. Check the firmware available follows the instructions to download and install the latest firmware.

Solution 5: Reset to Factory Settings

You can also use this Wavlink extender troubleshooting tip. By resetting your extender to its factory settings, you will remove all the data that you customize. Below we give the steps to reset the device:

• Navigate a small reset button on the extender. (Usually located on the back panel).
• Use a paperclip or a pointed object to press button.
• Hold the button for about 10 seconds.

This will reset the extender to its default settings, and you can set it up again from scratch.

Solution 6: Check the Network Password

When you set up your Wavlink extender, you need to enter your Wi-Fi network’s password. If you recently changed your router’s password, make sure to update it on the extender as well. An incorrect password will prevent the extender from connecting to your network.

Solution 7: Reduce Interference

Other electronic devices and appliances, like cordless phones and microwaves, can interfere with your Wi-Fi signal. Try relocating your Wavlink extender away from such devices to improve its performance.

Solution 8: Reboot the Wavlink Extender

Rebooting is the most versatile Wavlink extender troubleshooting tip that can fix the minor issues with the networking device. Plus, this solution also helps you to remove technical glitches from the device. Below we highlighted accurate steps to reboot the device:

• Initially, remove the extender from the extender.
• Wait for at least 5 minutes.
• Power on the extender by plugging it into the socket.

Now your device power cycle properly.

Conclusion,

Wavlink extenders are fantastic tools for enhancing your Wi-Fi coverage, but they might run into occasional problems. By following the aforementioned Wavlink extender troubleshooting tips, you can quickly identify and resolve most issues.