Fix Default Wavlink IP Address Not Working Issue
The official login portal of the Wavlink WiFi range extender can be found at 192.168.10.1 but nowadays, a section of user’s face issues while accessing the Wavlink IP address. If you are also stuck in the same problem and looking for an appropriate guidance, then you have come to the right place.
Today, in this blog we will tell you about the most working and effective troubleshooting tips so that you can fix the problem in no time and will able to access the IP address. We advise users to read this entire post without missing the points.
Well, before we discuss about the troubleshooting tips we would like to tell you about the reasons behind this issue. By knowing about the contributing factors, you will able to fix the issue from its roots.
Wavlink IP Address Not Working | Reasons
Here we discuss all the common reasons that mostly cause the Wavlink extender IP not working issue:
Reason 1: Typos in IP Address
90 percent users face the Wavlink extender IP address not working issue due to typos in the IP. So, there is a chance that you make typing errors in the IP.
Reason 2: Outdated Browser
Outdated browser also could be the reason behind the Wavlink extender IP not working issue. Because outdated version of browser does not support the internet activities.
Reason 3: Broken Ethernet Cable
Defective and broken Ethernet cable creates the network issues which disturb the Wavlink login process.
Reason 4: Corrupted Firmware
Firmware in the Wavlink extender plays the important role. If it is working on its outdated versions, then it leads the issues in the device which is not good for it.
Reason 5: Cache and Cookies
You can also face this issue due to trash of the browser like cache and cookies because these files corrupt the internal files which cause the Wavlink extender IP not working issue.
Reason 6: Wireless Interference
Sometimes wireless interference cause the network problem which put the negative impact on the Wavlink login process. Maybe your device becomes the victim of WiFi interference.
Thus, these were the reasons that were dragging you to face the Wavlink IP address not working issue. This problem can be easily fixed by implementing the effective troubleshooting tips. To know about the solutions you need to read out the next section.
Fix: Wavlink IP Not Working
Hack 1: Restart the network
The very first hack you have to follow is reboot the Wavlink extender. This will help you to fix the minor issues and remove the technical glitches. To reboot the extender in perfect way we mentioned the instructions you can follow them:
- First unplug the Wavlink extender.
- Wait for 2-5 minutes until the device is powered off properly.
- After that, plug the extender back into the working wall outlet.
Now your device has been successfully restarted. Try to access the Wavlink IP address to ensure issue is resolved or not.
Hack 2: Use Correct IP
To access the extender’s web interface, double-check the IP address you are typing. While typing the address, there shouldn’t be any typos. Ensure that you are putting the IP address in the URL bar and not in the search field of the web browser. Try using the default login web address ap.setup if you are unable to access the Wavlink extender login page via a IP address.
Hack 3: Upgrade Internet Browser
We already mentioned above 192.168.10.1 not found problem may result from an outdated web browser version. Therefore, to access the 192.168.10.1 Wavlink WiFi extender login page, use the most recent version of your web browser.
Hack 4: Clear Cache & Cookies
Errors in logging into 192.168.10.1 can be brought on by cache memory, trash files, browsing history, or cookies. So, before going to the Wavlink WiFi range extender login page, clear the cache memory.
Hack 5: Verify the hardware connection
Make sure all of the cables and wires are connected properly. Any cable that is damaged or loose needs to be replaced right away.
Hack 6: Remove Wireless Interference
To remove the WiFi interference from the networking device is very important. You can remove it by changing the placement of the extender. You can place the device away from the electronic devices as well as thick walls.
Hence, in this way you can fix the Wavlink IP address not working issue. Once the issue is resolved you will able to access the login portal of the device.